Concept On The Principle Of Electric Hydraulic Jack

by Fredrick Rogers

In a hydraulic jack, fluid pressure doubles force in a cylinder to lift a big load. They use Pascal’s law to lift the heavy load, which demands a smaller input force to lift big things. They have a broad range of applications: machine shop, lifting platform etc.

Operating Principle

electric hydraulic jack are based on Pascal’s law. The law asserts that a pressure changes at any point in an enclosed incompressible fluid transfer throughout the fluid so that the same change occurs everywhere. This legislation also affects the hydraulic press and the braking system for most automobiles.

Hydraulic Floor Jack

A hydraulic floor jack, also known as a trolley jack, may be broken down into parts, including a horizontal piston that pushes the short end of a bell crank. The long arm of the bell crank is attached to the lift pad, which allows the weight to be raised and lowered vertically. As a means of adjusting for the arc motion, the long arm connects to the castor and the wheel.

Hydraulic Scissor Jack

Lifting capacity and height are both limited for scissor jacks compared to those of floor jacks. As a result, you can’t lift your car to do anything other than change a tyre with one of these jacks. However, their small size makes them convenient for transport in the trunk of virtually any car. Compared to its manual counterpart, the hydraulic scissor jack is much simpler to use. 7

Jack For Transmission

Hydraulic transmission jacks are designed to lift and support only the transmission of a vehicle. There is a vertical ram piston in the jack, and the top of the jack is wide. The transmission can be removed or reinstalled in the vehicle by clamping the frame around it. To properly service vehicles, a repair shop must have hydraulic transmission jacks. 6

Selection Standards

Consider a wide range of parameters before settling on the hydraulic jack that best meets your requirements. The essential component is the individual’s capacity for lifting weights. The hydraulic floor jack is the choice that has a smaller footprint. 5

The lifting ability of standard bottle jacks is restricted. However, the telescoping variety can elevate bigger goods to a greater height. 4


First, don’t load up the crane with more tonnage than it can handle. If the cylinder is overworked, the case could crack, or the hydraulic fluid could leak. For a second, there can’t ever be too much oil in the tank. Otherwise, the hydraulic jack’s maximum pressure won’t be attained. 3


Hydraulic jacks are a highly practical mechanical tool for raising massive objects. These hydraulic jacks can lift more weight over longer distances. The automotive, industrial, and construction sectors all make frequent use of hydraulic jacks. 2


The hydraulic jack’s cylinder is filled with pressured fluid via a pump’s plunger. As the plunger is retracted, hydraulic fluid is sucked into the pump chamber from the reservoir, and as it is pushed forward, it is pushed back into the cylinder. 1

You may also like

Leave a Comment